1963-64 ACCELERATOR SHAFT TO THROTTLE ROD CLIP
All Tri-Power 406-390
Holds throttle rod to accelerator shaft
375780T $1.25 Each
|  |
1963-64 ACCELERATOR SHAFT TO THROTTLE ROD CLIP
All 2x4 427
Holds throttle rod to accelerator shaft
375782-D $1.75 Each
|  |
1963 ACORN NUT FOR ATTACHING REAR FINISH
PANELS TO BODY
All 63s
377633-S .65¢ Each
|  |
1963-64 AIR CONDITIONING ROUND REGISTER (OUTLET) CLIP
All Ford Type Air Conditioners with Round Outlets
Spring Clip that holds the chrome outlet into the housing
2 Required Per Outlet
C3AZ-19A683A $1.50 Each
|  |
1963-64 BRAKE HOSE RETAINING CLIP
Holds brake hose to frame mounted bracket
All Models
78-2814A $1.25 Each
|  |
1963-64 BRAKE LINE CLIP
Right front brake line to frame crossmember
3 Required
All Special High Performance 427-406-390
354417 50¢ Each
|  |
1963 REAR BUMPER STONE DEFLECTOR MOUNTING CLIP
Metal clip that holds rear bumper stone deflector on
rear body panel lip.
All. 6 Required
371141 95¢ Each
|  |
1963-64 CONSOLE GLOVE BOX DOOR STRIKER
All Galaxie 500XL
C2AZ-7606157B $5.50
|  |
1963-64 CONVERTIBLE TOP BOOT ATTACHING STUD
Stud that attaches to mouldings around convertible top well.
The convertible top boot snaps onto this stud.
#8-32 x 15/32" Stud Fastener
359274 ALL $1 Each
|  |
1963-64 CONVERTIBLE TOP BOOT STUD RETAINER
This is the Retaining Nut that holds the Convertible
Top Boot Studs to the moulding and body
19 Required 8/32 Thread
373248 $1.25 Each
|  |
1963-64 CONVERTIBLE BOOT SEAT BACK STUD
These are the Studs directly behind the rear seat backs.
They are used to hold the stainless steel trim in place
at the top of the rear seats on both the Galaxie 500XL
and Galaxie 500. The convertible top boot snaps onto
these studs.
358432-R $1.50 Each
|  |
1963-64 CONVERTIBLE REAR SIDE TRIM
PANEL BUTTON STUD
These are the button studs that attach to each of the side
panels near the top of the panel. The Convertible top boot
snaps on to these 3 studs on each side.
95472 $1 Each
|  |
1963-64 CONVERTIBLE TOP ROOFRAIL WEATHERSTRIP
MOUNTING BOLT
All Convertibles
Special Head Mounting Bolt
Not exactly the same as the original but will work correctly
22 Required Per Car
353014 $2 Each
|  |
1963-64 SCREW PROTECTORS FOR THE CORE SUPPORT
CAP COVERS for the screws that protrude through the core
support that mount the regulator and horn relay. All Models.
42144 As Needed 65¢ Each
|  |
1963-64 COWL TOP GRILLE ATTACHING SCREWS
8 x 1/2" Hex Washer Head All Models
These screws hold the cowl grille in place at the top of the
firewall in front of the windshield.
42133 $2.75
Package of 10
|  |
1963-64 WIRING HARNESS TO TOP OF COWL CLIP
Holds the wiring harness at the top of the cowl
5 Required All Models
372866 $5 Each
|  |
1963-64 DASH PAD RETAINING CLIP
This clip secures the dash pad to the metal dash structure
8 Required
C3AZ-6204278A $3 Each
|  |
1963-64 COPPER WASHER DIFFERENTIAL CARRIER
(Rear End Center Section)
Copper washer that is used on each of the center section to housing
mounting Studs
10 Required
373820-S NOS 75¢ Each
|  |
1963-64 DIFFERENTIAL CARRIER (Rear End) HEX LOCK NUT
Used on all Models
3/8-24
10 Required
373820-S NOS $1.50 Each
|  |
1963-64 DOOR HINGE PIN AND BUSHING SET
Kit includes new Hinge Pin and 2 Bushings
Loose and worn hinge pins can be replaced with this Kit.
This Kit will repair doors that are loose at the hinge's center pivot.
1 Kit Does 1 Hinge
C3AZ-5422841 $3 Per Kit
|  |
1963-64 DOOR LATCH SCREWS
12-24 x 1/2" Cross Recess Flat Head Screws and
Washer Assembly. All Models
356782 $2.50
Package of 3
|  |
1963-64 DOOR LOCK STRIKER SCREWS
5/16"-24 x 1 Flat Head Phillips Locking Screws
5/8" Head
All Models 2 Per Door
371402 $2 Each
|  |
1963-64 DOOR ACCTUATING AND DOOR LOCK ROD
NYLON BARREL SLEEVE
.148" I.D. x .39" Long
Nylon Push-In Barrel Sleeve that holds the door lock rod
to the lock cylinder. Also holds the door opening acctuating
rod to the latch mechanism.
Used on All Models
377647S NOS $1.25 Each
|  |
1963-64 DOOR AND QUARTER WINDOW REGULATOR ARM
ROLLER ASSEMBLY
Roller with clip that slides over the regulator arm stud and rides in
the window channel track.
4 Per Door as required
All NOS
C0AB-6423240B $1.50 Each
|  |
1963-64 DOOR OR WINDOW REGULATOR HANDLE RETAINER
Horseshoe clip that holds the window or door handle
onto the Regulator shaft
357550-S As required 50¢ Each
|  |
1963-64 DOOR PANEL RETAINING CLIPS
Wire Type All Models
C3AZ-23945A 70¢ Each
|  |
1963-64 EXHAUST MANIFOLD BOLT LOCKING TABS
Original Equipment on All V8s Except 427
15 or 16 Needed Per Car
Specify Number Needed
370383 95¢ Each
Set of 16 $15
|  |
1963-64 EXHAUST MANIFOLD BOLT LOCKING TABS
427 Cast Iron Headers Only
C3AZ-9A447A Set of 8 $25
|  |
1963-64 EXHAUST MANIFOLD BOLT SETS
For All 427-406-390-352
These are the correct length and color used with the
Exhaust manifold bolt locking tabs.
20408-S Set of 16 $14
|  |
1963-64 FENDER TO COWL SIDE RETAINER BOLT & CLIP
All Models
B5A-7650816A $2.95
|  |
1963-64 FENDER EAGLE BARREL CLIP
3/16" Sleeve
Barrel Clip that holds the 427-406-390 Fender Eagle
Emblems in place.
Each Fender Eagle Requires 3 Clips
375480 65¢ Each
|  |
1963-64 FIREWALL PAD RETAINING CLIP
All Models
12 Clips Required Per Firewall Pad
374252 85¢ Each
|  |
1963-64 FLAT HEAD 8x3/8 ATTACHING SCREW
These are the flat head Phillips screws used to attach roofrail
weatherstrip, mouldings, moulding clips, weatherstrip channel,
interior panels, etc.
These are used wherever a flat head screw is needed.
377948 30¢ Each
|  |
1963-64 FUEL AND BRAKE LINE COMBINATION
FRAME CLIP
This Clip holds the fuel and brake lines to the frame rail.
Specify Fuel Line Size and Number Needed
5 to 7 Clips Needed Per Car
356626 5/16 Fuel Line All Standard Engines $1.50 Each
371063 3/8 Fuel Line
All Hi-Performance 427-406-390 $1.75 Each
|  |
1963-64 FUEL LOG FITTING FOR HI-PERFORMANCE
427-406-390
Included with new Fuel Logs
2x4 or 3x2
87498-S 1 Required $9
|  |
1963-64 HORN RING RETAINER PLATE TO HORN RING
SCREWS
These screws attach the nylon horn ring retainer plate to the horn ring.
3 Required
51763-S 50¢ Each
| |
1963-64 HEATER HOSE TO RIGHT HAND INNER FENDER CLAMP
All Hi-Performance 427-406-390
Holds both heater hoses to right inner fender on all
High Performance 427-406-390
C3AE-18481A $7 Each
|  |
1963 HOOD LETTER BARREL CLIP
1/8" Barrel Clip that holds hood letters on hood
8 Required
375890 NOS 65¢ Each
|  |
1964 HOOD LETTER BARREL CLIP
3/32" Barrel Clip that holds hood letters on hood
8 Required
378362 NOS 65¢ Each
|  |
1963-64 INTERIOR GARNISH MOULDING AND TRIM SCREWS
Size #8 with Special #6 Heads
#421 8 x 5/8" Chrome Plated 15¢ Each
#483 8 x 1" Chrome Plated 20¢ Each
#423 8 x 1 1/4" Chrome Plated 23¢ Each
#623 8 x 2" Zinc Plated 30¢ Each
| |
1963-64 LUG NUTS (WHEEL)
1/2"-20 5 Per Wheel
C0AZ-1012A $1.50 Each
|  |
1963-64 PARKING BRAKE CABLE TO CONTROL ASSEMBLY
RETAINING CLIP
Holds parking brake cable to control assembly
All Models
8M-2814 $1 Each
|  |
1963-64 PARKING LAMP LENSE MOUNTING SCREW
Special 8-32 Twist Shank Screw used to mount the
Parking Lamp Lense to the Parking Lamp Body Assembly
Specify Number Needed
372856 NOS $1 Each
|  |
1963-64 PCV INTAKE ELBOW FITTING
High Performance
All 427 2x4, 406-390- 3x2
Some 427-406-390 4bbl High Performance
This is the elbow fitting that is screwed into the back of the
intake manifold below the rear carburetor base. The PCV
Valve is then screwed into this elbow fitting.
PCV Valve is not included.
376711-S $12
|  |
1963-64 RADIATOR SUPPLY TANK OVERFLOW HOSE J-CLIP
427-406-390-352
This clip is missing on almost all of the Big Block radiator supply tank
overflow hoses. The clip attaches to a water pump mounting bolt and
holds the radiator supply tank overflow rubber hose firmly in place.
All 63 or 64 Ford models with a Big Block V8 used this clip on the
supply tank overflow hose.
379042-S $1.95
|  |
1963 REAR QUARTER PANEL HASH MARK BARREL CLIP
All 500, XLs, Country Sedans
353577 65¢ Each
|  |
1963 SIDE SCRIPT BARREL CLIP
1/8" Barrel Clip that holds the side script and trunk letters in place.
375890 NOS 65¢ Each
|  |
1963-64 SPEEDOMETER GEAR RETAINING CLIP
C1DD-17292A All $1.95 Each
|  |
1963-64 SPRING NUT CAP
Heater - Defroster - Air - Vent Cables
Spring Cap holds cables onto each lever.
372927-S $2 Each
|  |
1963-64 STARTER CABLE TO RIGHT HAND INNER FENDER CLIP
Wiring routes through this clip on right inner fender
3 Required
372737S $8 Each
|  |
1963-64 STEERING INSULATOR COUPLING BOLT (SPECIAL)
All Models
358794 NOS $3.75
|  |
1963-64 STEERING WHEEL RETAINING NUT
Nut that holds steering wheel onto steering shaft
350983 $5 Each
|  |
1963-64 TAIL LIGHT LENSE MOUNTING SCREW
Special 8-32 Twist Shank Screw used to mount the
Tail Light Lense to the Tail Light Body Assembly
Specify Number Needed.
372856 NOS $1 Each
|  |
1963-64 TAIL LIGHT WIRING TO LEFT REAR INNER
FENDER AND REAR SEAT BULKHEAD CLIP
All
372046 NOS $3 Each
|  |
1963 TRUNK LETTER BARREL CLIP
1/8" Barrel Clip that holds the trunk letters to rear panel
14 Required
375890 NOS 65¢ Each
|  |
1964 TRUNK LETTER BARREL CLIP
3/32" Barrel Clip that holds trunk letters to deck lid
8 Required
378362 NOS 65¢ Each
|  |
1963-64 TRUNK SIDE PANEL BOARD MOUNTING SCREW
All Except Wagon
Need 4 Per Side - 8 Total
42154 65¢ Each
|  |
1963-64 ENGINE GAUGE WIRING TO VALVE COVER CLIP
All Big Blocks
3 Required
353547-S 65¢ Each
|  |
1963-64 VOLTAGE REGULATOR AND HORN RELAY
MOUNTING SCREWS
Hex Washer Head
Zinc Plated
31497-S $2.50
Package of 5
|  |
1963-64 LUG NUTS (WHEEL)
1/2"-20 5 Per Wheel
C0AZ-1012A $1.50 Each
| |
1963-64 WINDSHIELD INSTALLATION CLIP
Holds windlace against the interior body of the car at the rear
door jamb and roof lip on some models.
As Required
B7A-7002614A INQUIRE
|  |
1963-64 WINDSHIELD WIPER CONNECTING ARM CLIP
C3SZ-17531A All NOS $3
|  |
1963-64 WIRING HARNESS STRAP
Nylon Strap that holds wiring harness to inner fender, firewall
and front crossmember.
All
372368-S NOS 85¢ Each
|  |
1963-64 FENDER BOLT
Fender to Inner Fender
Fender to Core Support Bracket
5/16-24 x 1"
Correct Hex Washer Head with Dog Point
6 Per Fender
353483 65¢ Each
|  |
1963-64 FENDER BOLT J-CLIP
5/16-24
Attaches to Inner Fender at bolt hole. The bolt that holds the
fender to the inner fender is secured by this J-Clip Bolt
6 Required Per Fender
359952-S NOS $2.50 Each
|  |
1963-64 FENDER BOLT
Top of Fender To Cowl
2 Needed Per Side
Fender To Body at Front Rocker Panel
2 Needed Per Side
5/16-24 x 1 1/4" Correct Hex Washer Head
Limited Supply
Specify Number Needed
353485 95¢ Each
|  |
1963-64 FRAME, BODY, CORE SUPPORT, CHASSIS
ENGINE COMPARTMENT BOLT
5/16-18x1" Bolt with Washer Head and Spin Lock Nut
20251 $1.00 Each
|  |
1963-64 VALVE COVER BOLT SET
All 427-406-390-352
Hex recessed head with floating lock washer
5/16-18 Cadmium Plated
371065-S Set of 10 $19.50 Set
|  |
