1963-64 ACCELERATOR RETURN SPRING
All 352-390 with Automatic Transmission
C0AA-9737G NOS SOLD OUT
|  |
1963-64 ACCELERATOR RETURN SPRING
All 427-406-390-352 with 4-Speed, 3-Speed, or
3-Speed with Overdrive Transmission
C0AA-9737JH $7 Each
|  |
1963-64 ACCELERATOR RETURN SPRING BRACKET
427-406-390-352 with Standard Transmission
The correct bracket that mounts on the top of the bellhousing.
C0AZ-9741B $17.50
|  |
1963-64 ACCELERATOR SHAFT TO THROTTLE ROD CLIP
(ALL TRIPOWER 406-390)
Holds throttle rod to accelerator shaft
375780T $1.25 Each
|  |
1963-64 ACCELERATOR SHAFT TO THROTTLE ROD CLIP
All 2x4 427
Holds throttle rod to accelerator shaft
375782-D OUT OF STOCK
|  |
1963-64 ACCELERATOR RODS
All 2x4 427 and 406/390 3x2
This is the accelerator rod that goes from the carburetor
bellcrank to the firewall bellcrank.
427 2x4 C3AZ-9A702B $69.50 Each
406/390 3x2 C1AE-9A702A $85 Each
| |
1963-64 TRI-POWER AIR CLEANER TO CARBURETOR GASKET
Cork Gasket between Carburetor and Air Cleaner
3 Required
C1AE-9654A $4 Each
|  |
1963-64 AIR CLEANER WING NUTS
358871 NOS $1.25 Each
|  |
1963-64 427 DUAL QUAD AIR CLEANER ELEMENT
1 13/16" Tall
C3AZ-9601E NOS $38
|  |
1963-64 390-406-TRIPOWER AIR CLEANER ELEMENT
EDJ-9601A NOS $35
|  |
1964 AIR CONDITIONING DRIER
10.69" Long x 2.00" O.D.
Clamp on Type
Ford used 3 different styles of A/C driers in 1964.
They do not interchange. If your A/C drier does not
look the same as this one, it will not work.
C4AZ-19959B All $49
|  |
1963-64 ALTERNATOR ADJUSTMENT ARM BRACKET
427-406-390
High Performance Engines Only
Used on all High Performance 427-406-390 engines
Equipped with an alternator.
C3MY-10145A $90
|  |
1963-64 BALL JOINT UPPER KIT
See Diagram Page 149
C1AZ-3049A $45 Each
|  |
1963-64 BALL JOINT LOWER KIT
See Diagram Page 149
C1AZ-3050B All $85 Each
|  |
1963-64 BATTERY CABLE SETS
Correct Type
Includes Positive Battery Cable, Negative Battery Cable and
Relay to Starter Cable
All 260-289-352-390-406-427
C3AZ-14300S $53.50 Set
|  |
1963-64 BATTERY HOLD DOWN CLAMP
All Battery Trays
1 Required
C5DZ-10718A $5.50
|  |
1963-64 BATTERY HOLD DOWN CLAMP BOLT AND NUT
All Battery Trays
Bolt Carriage 5/16-24 x 1 3/4 Nut 5/16024 Shoulder Hex
Each package contains 1 bolt, 1 nut and 1 Retainer
1 Required
352233 $1.25 Per Pkg
|  |
1963-64 BATTERY TRAY
352-390-406-427 V8
Will also fit some 260 and 289 V8 with Heavy Duty Generator
C2SZ-10764A $25
|  |
1963-64 BATTERY TRAY
260-289
Includes Support Bracket
C3AZ-10764C $30
|  |
1963-64 FRONT BRAKE DRUMS Less Hub Assembly
All High Performance 427-406-390
Some Police, Some Wagons, Some Special Purpose
11 x 3" LIMITED SUPPLY
C3AZ-1125A $135 Each
All Standard Equipment Except Hi-Performance
11 x 2 1/2" LIMITED SUPPLY
C3AZ-1125B $100 Each
|  |
1963-64 BRAKE DRUM (REAR)
See Diagram Page 152
11 x 2 1/2" All Models including Hi-Performance
C3AZ-1126A $100 Each
|  |
1963-64 BRAKE MASTER CYLINDER
Less Push Rod and Clip
1963 With Power Brakes 1" Bore
C3AZ-2140A $90
1963-64 Without Power Brakes 1" Bore
C3AZ-2140B $90
1964 With Power Brakes 7/8" Bore
C4SZ-2140A $90
SPECIFY YEAR AND WITH OR WITHOUT POWER BRAKES
|  |
1963-64 CHROME MASTER CYLINDER CAP WITH GASKET
Late 64 Style
C4SZ-2162A $20
|  |
1963-64 MASTER CYLINDER PUSH ROD BUSHING
All 2 Per Car
B2A-2474A NOS $12 Each
|  |
1963-64 POWER BRAKE BOOSTER
Midland Ross Band or Screw Type
Includes Matched Master Cylinder
1963 C3AZ-2005A $495
1964 C4AZ-2005A $295
SPECIFY YEAR Rebuilt LIMITED SUPPLY
**Because of the imited number of these parts, we must receive a
rebuildable core before we can sip the replacement part.
|  |
1963-64 BRAKE FRONT WHEEL CYLINDERS
C3AZ-2061A Right
C3AZ-2062A Left
All Models SPECIFY RIGHT OR LEFT NORS $65 Each
|  |
1963-64 BRAKE REAR WHEEL CYLINDERS
C3AZ-2261A Right
C3AZ-2262A Left
All Models SPECIFY RIGHT OR LEFT NORS $55 Each
|  |
1963-64 FRONT BRAKE HOSE
14 1/4" Long All
B4AZ-2078A $17 Each
|  |
1963-64 REAR BRAKE HOSE
15" Long All
B7AZ-2078A $29
|
1963-64 REAR BRAKE SHOE HOLD DOWN KIT
Includes: 8 Hold Down Cups
4 Brake Shoe Springs
4 Brake Shoe Hold Down Pins
6 Brake Shoe Retaining Springs
2 Brake Lever U Clips
1 Kit Does Both Rear Brakes
C1AZ-2A094B All Limited Supply $21 Per Kit
| |
BRAKE LINES:
| |
1963-64 FRONT BRAKE LINE SET (Pre Bent)
All Except 427-406-HiPo 390
Includes: Right Front Brake Line, Left Front Brake Line and
Master Cylinder to Brake Block Line
Original Steel Material
C1AZ-2263S $48.95
| |
1963-64 FRONT BRAKE LINE SET (Pre Bent)
All 427-406-390 Hi-Performance
Includes: Special Right Front Brake Line, Left Front Brake Line
and Master Cylinder to Brake Block Line
Original Steel Material
C3AE-2263S $55.95
Plus $20 Oversize Shipping
| |
1963-64 FRAME BRAKE LINE FRONT TO REAR (Pre Bent)
All Models and Engines
Original Steel Material
C3AZ-2267S $55.95
Plus $20 Oversize Shipping
| |
1963-64 REAR BRAKE LINES
(PRE BENT) FOR REAR END HOUSING
All Models
2 Pre bent steel lines that fit across the rear end housing for the rear
brakes. These are a must for any restoration.
2 Line Set Original Steel Material
C3AZ-2265 A & D $35.95
* * * * * *
| |
1963-64 EMERGENCY BRAKE FRONT CABLE
From foot pedal assembly to equalizer
C3AZ-2853A Replacement $50
| |
1963-64 EMERGENCY BRAKE REAR CABLE
From equalizer to rear brakes
2 Required
C3AZ-2A635BR Replacement $45 Each
See Diagram Page 148
| |
1963-64 CARBURETOR 427 410HP Q Code
These carburetors are totally rebuilt to show condition and
re-colored to original specifications.
Please call for available Date Codes.
C3AE-9510B LIMITED SUPPLY $575.00
| |
1963-64 CARBURETOR LINKAGE KITS
427 2x4 (Dual Quad) Reproduction $61.95
2x4 C3AZ-9732S Original $90.00
|  |
406-390 3x2 (Tri-Power) Reproduction $62.95
3x2 C1AE-9732S Original $95.00
|  |
1963-64 CARBURETOR HOLD DOWN NUTS
These are the correct half size 5/16-24 nuts used to hold
the carburetors to the intake manifold. These are used on
all 63 and 64 full size Fords: 427-406-390-352-289-260-223
These are extremely hard to find and a must for any restoration.
351089-S Package of 4 $3
|  |
1963-64 CENTER LINK
Manual Steering
See Diagram on Page 150
Professional Quality Rebuilt done here in the U.S.A.
> ** Because of the limited number of these parts, we must receive a
rebuildable core before we can ship the replacement part.
C3AZ-3304C $325
| |
1963-64 CHOKE OUTLET TUBE INSULATION
All Models including High Performance
White Insulation around Choke Tube
C1AE-9865A $7
|  |
1963-64 CHOKE HEAT CHAMBER ASSEMBLY
All 427s and 406s
This is the fitting that is screwed into the exhaust manifold. The choke
tube fits into this fitting and allows the heat from the exhaust manifold
to transfer up to the choke housing on the carb.
1 Required Per Car
C3AZ-9890A $49.95
|  |
1963-64 CLUTCH FORK ADJUSTING ROD
All 390-352-223 with 4-Speed, 3-Speed, 3-Speed Overdrive Transmission
All 289-260 with 3-Speed Overdrive Transmission
Some 406 4-Speed, 3-Speed or 3-Speed Overdrive Transmission
This is the adjustable clutch rod that attaches to the equalizer bar
and pushes the clutch fork.
C3AZ-7521E NOS $27.50
|  |
1963-64 CLUTCH FORK ADJUSTING ROD
All 427s or any Big Block using 427 Cast Iron Headers
This is the special adjusting rod used only on the 427s
C3AZ-7521D $85
|  |
1963-64 CLUTCH DISC 406-390
11" Diameter 10 Spline 8 Springs
All 4-Speed and 3-Speed
C3AZ-7550C $75
|  |
1963-64 CLUTCH RELEASE EQUALIZER BAR 427
CLUTCH CROSS SHAFT
This is the special equalizer shaft used on all 427s
or any Big Block equipped with 427 cast iron headers
and a 4-speed.
C3AZ-7528G $250
|  |
1963-64 CLUTCH EQUALIZER BAR (Z-BAR)
406-390-352-223
406 with Short Headers
C3AZ-7528F $150
| |
1963-64 CLUTCH RELEASE LEVER ASSEMBLY
CLUTCH FORK
All with T-10 4-Speed
427-406-390-352
11½" Long
C3AZ-7515 B or C $85
|  |
1963-64 CLUTCH RELEASE LEVER ANTI-RATTLE SPRING
All 4-Speed, 3-Speed, 3-Speed Overdrive
AB-7562A $9
|  |
1963-64 CLUTCH FORK RELEASE SPRING BRACKET
427 ONLY
Bracket mounted on crossmember that clutch fork spring
attaches to. This bracket is always missing on 427 cars.
C3AZ-7542A $45.95
|  |
1963-64 COIL
All (Except Transistor Ignition)
Reproduction of O.E.M. coil for V8s and 6 Cylinders
including Hi-Performance. Correct Mustard colored top.
B6A-12029B $45.95 Each
|  |
1963-64 COIL TRANSISTOR IGNITION ONLY
VERY LIMITED SUPPLY
C3TZ-12029A NOS $175
| |
1963-64 COIL MOUNTING BRACKET
260-289-Special 390-406-427
B8S-12043B NOS $18
| |
1963-64 CONVERTIBLE TOP HYDRAULIC HOSE ASSEMBLY
WITH FITTINGS
All Convertibles
These are the White Hydraulic Hoses that run from the
Convertible Top Pump and Motor to each of the Convertible
Top Cylinders.
2 Hoses Required
C3AZ-7653390A $69.50 Each
OR $125 Pair
|  |
1963-64 CONVERTIBLE TOP HYDRAULIC MOTOR AND PUMP
Universal Application 12 Volt New
1963 C2AZ-76533A00A
1964 C4DZ-76533A00A $225
Specify 63 or 64
|  |
1963-64 CONVERTIBLE TOP CYLINDERS
Newly Manufactured
1963 C3AZ-7650600A
1964 C4DZ-7650600A
Specify 63 or 64 $150 Each
|  |
1963-64 CONVERTIBLE TOP CABLES
These are a universal convertible top cable and spring assembly.
This Kit includes 2 Cables, 2 Springs and Mounting Hardware
to repair your existing damaged or missing cables
CTC-Kit $26
| |
1963-64 CONVERTIBLE REAR SIDE TRIM PANEL PISTON COVERS
Panel Board that covers the area where Convertible Top Pistons mount
on the side trim panels
All Convertibles
Black Only
C3AZ-7631020/21A 4-Piece Set $15
| |
1963-64 CRANKCASE VENTILATION ADAPTER
All 427-406-390 High Performance
Included with Crankcase Vent System
C1AE-6A665H $17.50
|  |
1963-64 CRANKCASE VENT SYSTEM ASSEMBLY
427 2x4
406-390 3x2
This is the PCV System Assembly used for multiple carburetors.
The assembly includes the intake manifold elbow fitting, PCV Valve,
PCV Hose, 2 Clamps, Crankcase Ventilation Adapter Plate and
Gasket. This is all of the external items used on the intake manifold.
Assembly does not include the mesh element or basket retainer
C3AE-6A663 Kit $47.50
|  |
1963-64 CRANKSHAFT HARMONIC BALANCER
All 390-352 Except High Performance
Single Groove Pulley
C3AZ-6312E $135
|  |
1963-64 COPPER WASHER DIFFERENTIAL CARRIER
(Rear End Center Section)
Copper Washer that is used on each of the center section
to housing mounting studs
10 Required
373820-S NOS 75¢ Each
|  |
1963-64 DIFFERENTIAL CARRIER
(Rear End) HEX LOCK NUT
Use on all Models
3/8 - 24
10 Required
34445-S $1.50 Each
|  |
1963-64 DIFFERENTIAL HOUSING TO CENTER SECTION GASKET
All 9" Rear End Assemblies
B7A-4035A NOS $18
|  |
1963-64 DIPSTICK TUBE
Standard 390-352
TUBE ONLY
B8A-6754A $45
|  |
1963-64 DISTRIBUTOR CAP (HIGH PERFORMANCE)
WITH BRASS ELECTRODES
Fits all V8s except Transistorized Ignition
B7A-12106A $12.95
|  |
1963-64 DISTRIBUTOR PRIMARY WIRE
All High Performance 427-406-390
C3AZ-12216A NOS $9 Each
| |
1963-64 DISTRIBUTOR VACUUM LINES
Pre-Bent Steel Lines with Fittings
This is the steel vacuum line that goes from the distributor
vacuum port to the carburetor port. It includes the correct
brass fittings.
Specify Year, 390 or 352 and whether it is a 2bbl or 4bbl carburetor
C3AZ-12226A 390/352 4bbl $17.50
C3AZ-12226B 352 2bbl $17.50
| |
1963-64 DOOR LOCK STRIKER PLATE & SHIM
All Models
C2OZ-6222008B $18 Each
|  |
1963-64 DOOR HINGE PIN AND BUSHING SET
Kit includes new Hinge Pin and 2 Bushings
Loose and worn hinge pins can be replaced with this kit.
This kit will repair doors that are loose at the hinge
center pivot.
1 Kit does 1 Hinge
C3AZ-5422841 Kit $3 Per Kit
|  |
1963-64 EXHAUST MANIFOLD BOLT LOCKING TABS
Original Equipment on all V8s except 427
Specify Number Needed
370383 NOS 95¢ Each
Set of 16 $15
|  |
1963-64 EXHAUST MANIFOLD BOLT LOCKING TABS
427 Cast Iron Headers Only
C3AZ-9A447A Set of 8 $25
|  |
1963-64 EXHAUST MANIFOLD BOLT SETS
For All 427-406-390-352
These are the correct length and color used with the
exhaust manifold bolt locking tabs.
20408-S Set of 16 $14
|  |
1963-64 EXHAUST THERMOSTAT CONTROL VALVE
(HEAT RISER)
All 406-390- High Performance
1x4, 3x2
LIMITED SUPPLY
C0AE-9A427B NOS $250
|  |
1963-64 FIREWALL HEATER DELETE OPENING COVER PLATE
All Lightweights and Heater Delete Cars
C3AZ-6201846A $45
|  |
1963-64 FLYWHEEL AND RING GEAR
All 390/352 V8 Automatics with Cruisematic Transmission
153 Teeth 14.96" O.D.
B8A-6375B $150
|  |
1963-64 FUEL FILTER BOWL WITH GASKET
All standard 390-352-289-269 6 Cylinder
Screw on metal filter bowl at the bottom of all
standard fuel pumps. Plain steel bowl
C3AZ-9355RP $30
|  |
1963-64 FUEL PUMP HIGH PERFORMANCE
427-406-390
High Performance OEM AC style fuel pump
The A/C style pump came on all of the 427-406-390
High Performance cars from the Factory.
C0AE-9350C LIMITED SUPPLY NOS $285
FACTORY REBUILT $225
|  |
1963-64 FUEL TANK SENDING UNIT
WITH GASKET
C2AZ-9275D ALL Except Station Wagon $90
|  |
1963-64 FUEL TANK SENDING UNIT FLOAT
This is the brass float that attaches to the arm of the
fuel tank sending unit. With age these floats sometimes
absorb fuel and then give the sending unit a false reading.
This float is included with a new Sending Unit
C0AZ-9202B NOS $8
|  |
1963-64 FUEL TANK SENDING UNIT PICKUP TUBE FILTER
This is the filter at the end of the sending unit's pickup tube.
It is used in all Models and Body Styles. Included with new Sending Unit
C3AZ-9A011A $22
|  |
1963-64 FUEL TANK SENDING UNIT GASKET
2.41"ID-2.58"OD-.125 Thick
C0AF-9276A ALL NOS $2
|  |
1963-64 FUEL TANK SENDING UNIT LOCKING RING
C0AZ-9A307A All $3.75
|  |
1963-64 FUEL LOGS
All 427-406-390 with multiple carb
Tri-Power 3x2
C1AE-9D280A $47.50
|  |
Dual Quad 2x4
C3AZ-9D280B $51.95
|  |
1963-64 FUEL LOG FITTING FOR HIGH PERFORMANCE
427-406-390 2x4 or 3X2
Included with new fuel logs
1 Required
87498-S NOS $9
|  |
FUEL LINES:
| |
1963-64 CARBURETOR HIGH PERFORMANCE FUEL LINES
2X4 AND 3X2
All High Performance
427-406-390 Dual Quads and Tripower
Each set contains 2 Lines
These lines connect the fuel pump to the fuel filter and
the fuel filter to the fuel log.
*These are the Only Correct fuel lines available
C3AZ-9156A&B $28.95 Set
| |
1963-64 CARBURETOR HIGH PERFORMANCE FUEL LINES
1X4 427-406-390
Single High Performance 4bbl Fuel Line Set with Holley
Carb and separate fuel filter.
2 Line Set
These lines connect the fuel pump to the fuel filter and
the fuel filter to the carb
*These are the Only Correct fuel lines available
C0AE-9156A/B $28.95 Set
| |
1963-64 CARBURETOR FUEL LINE
FUEL PUMP TO CARBURETOR
1 Piece Line
With Ford Carburetor
1963-64 390 4bbl Without Air Conditioning
1964 352 4bbl Without Air Conditioning
C3AZ-9156D $19.50
| |
1963-64 CARBURETOR FUEL LINE
FUEL PUMP TO CARBURETOR
1 Piece Line
With Ford Carburetor
1963-64 390 4bbl With Air Conditioning
1964 352 4bbl With Air Conditioning
C4AZ-9156A $23.50
| |
1963-64 FRAME FUEL LINE 5/16" FRONT TO REAR (Pre Bent)
All Models and Engines except 427-406-390 High Performance
Original Steel Material
C1AZ-2269S $85.95
Plus $25 Oversize Shipping
| |
1963-64 FRAME FUEL LINE 3/8" FRONT TO REAR (Pre Bent)
All Models with 427-406-390 High Performance
Original Steel Material
C3AE-2269S $92.95
Plus $25 Oversize Shipping
| |
1963-64 FUEL AND BRAKE LINE COMBINATION FRAME CLIP
This clip holds the fuel and brake lines to the frame rail.
SPECIFY FUEL LINE SIZE AND NUMBER NEEDED
356626 5/16" Fuel Line
All Standard Engines $1.50 Each
371063 3/8" Fuel Line
All Hi-Performance 427-406-390 $1.75 Each
|  |
1963-64 FUEL LINE FLEX HOSE
Rubber hose with special fitting that connects frame
fuel line to the fuel pump.
All 427 Lightweights and All 427/406/390 Hi Performance
C1UU-9288A $15
|  |
1963-64 FUEL LINE CLAMP
Original Crimp Type
Fuel hose clamp from fuel log to carburetors
All High Performance 427-406-390 2x4 and 3x2
C0AZ-8287A 60¢ Each
|  |
1963 FUEL TANK FILLER CAP (Gas Cap)
All
B9A-9030A/B NOS $40
|  |
1964 FUEL TANK FILLER CAP (VENTED)
All
C3AZ-9030A/B NOS $37
| |
1963-64 FUEL FILTER BRACKET
All High Performance 390-406-427
C0AE-9180A $35
|  |
1963-64 FUEL FILTER CANISTER
All High Performance 427-406-390
B7Q-9155A Inquire
|  |
1963-64 FUEL FILTER ELEMENT (STRAINER)
All 6 and 8 Cylinder including Special High Performance
C4AZ-9365A $5.50
|  |
1963-64 FUEL PUMP FILTER BOWL GASKET
All 6 & 8 Cylinder Except Special High Performance
C2AZ-9364A NOS $1.75
All Special High Performance 390-406-427
B7T-9364A NOS $1.75
|  |
1963-64 GAS HOSE
427-406-390 2x4-3x2
Used from Fuel Log to Carb
Std 390-352-289-260-223
Used from Frame Fuel Line to Fuel Pump Inlet Fitting
Has the word Gas imprinted on the hose every 1"
C3AZ-9D281C Sold by the foot only $5.50 Ft.
|  |
1963-64 GAS TANK STRAP
All Except Station Wagon
2 Required
C0AA-9092D $22 Each
|  |
1963-64 GAS TANK STRAP BOLT
All Models Except Station Wagon
B8AZ-9A010A $3.50 Each
|  |
1963-64 GENERATOR PULLEY
HIGH PERFORMANCE All 427-406-390
Special Generator Pulley used on all the high
performance engines 427-406-390.
This pulley is very hard to find and is usually missing
FAP-10130A $250
|  |
1963-64 GENERATOR ADJUSTMENT ARM BRACKET
427-406-390 High Performance
C2AZ-10145A $35
|  |
1963-64 GROUND STRAP - ENGINE TO FIREWALL
All V8s 10" Long
FDA-14303A $6
|  |
1963-64 HEADLIGHT DIMMER SWITCH ELECTRICAL
PIGTAIL CONNECTOR
This is used to replace the dimmer switch electrical
connector without having to replace the whole
instrument wiring harness.
C0TZ-13A025A All $6
|  |
1963-64 HEATER BLOWER MOTOR
All Models
C2OZ-18527A $85
|  |
1963-64 HEATER CORE ASSEMBLY
Mid 1963 through 1964 All cars built after 12/13/62
2" Core
C3AZ-18476A NOS $90
SPECIFY YEAR AND CORE SIZE
|  |
1963-64 HEATER CORE INSULATION AND ANTI-RATTLE KIT
All 63 and 64s
Each Kit contains 2 Heater Core Tube Gaskets,
2 Heater Core Insulation Gaskets and
1 Lower Heater Core Anti-Rattler.
C3AZ-18455A $24 Per Kit
|  |
1963-64 HEATER CORE TUBE GROMMET
This is the square grommet that goes around the heater core
tube at the firewall. The heater hose sandwiches this grommet
between it and the firewall.
Included with Heater Core Anti Rattle Kit
2 Required
C3AZ-18596A $4.50 Each
|  |
1963-64 HEATER BOX (PLENUM) SEAL KIT
This is a 12 piece Kit that seals the inside of the heater box.
The Heater Core Anti Rattle Kit is included with this Kit.
It does not include the Heater Core Tube Grommets at the firewall.
C3AZ-18500A $26.50
| |
1963-64 HEATER HOSE
OEM Type
Correct 5/8" Ribbed Hose with 1/4" White Stripe
This is the Only Correct 5/8" Heater Hose available.
Correct hose for any 100 Point Restoration
This is sold in 8 ft. Section Only which is enough to do
all engine combinations in 1963 and 64.
C3AZ-18472A $28
| |
1963-64 HEATER HOSE
5/8" with White Motorcraft Stripe All
Excellent Replacement heater hose for anyone not
doing a 100 Point Restoration
8 Ft. needed to do any engine combination
FDA-18472B $2.00 Ft.
| |
1963-64 HEATER HOSE TO RIGHT HAND INNER FENDER CLAMP
All 427-406-390 High Performance
Holds both heater hoses to right inner fender
on all High Performance 427-406-390
C3AE-18481A $7 Each
|  |
1963-64 HEATER HOSE OUTLET ELBOW
Outlet mounted on the intake manifold for one
of the heater hoses.
All 390-406-427 High Performance
C1AF-18599A $35
|  |
1963-64 HEATER PLENUM CHAMBER TO DEFROSTER
NOZZLE CONNECTOR HOSE
Comes in 24" Lengths
2 Lengths Required Per Car
B5A-18556C $12.50
Per Length
|  |
1963-64 HOOD HINGE SPRINGS
All Models
These are often overlooked and should be
Replaced on any restoration.
C1AZ-16789B $15 Pair
|  |
1963-64 UNDERHOOD PAD INSULATION
See Diagram Page 34
Pre-Cut with Mounting Instructions
C3AZ-16738A $25 Set
|  |
1963-64 HOSE CLAMP KITS Band Type
(Correct Type)
SMALL BLOCK: 260-289 10 Clamps
C3AZ-8287SB $28
BIG BLOCK: 352-390-406-427 12 Clamps
C1AZ-8287BB $30
|  |
1963-64 FRONT HUB ASSEMBLY GREASE CAP
B5A-1131A All NOS $5.50 Each
|  |
1963-64 IDLER ARM KIT
See Diagram Page 150
Kit includes Idler Arm with Upper and Lower Idler Arm Bushings
LIMITED SUPPLY
C3AZ-3352A Power Steering $125
C3AZ-3352B Manual Steering $125
SPECIFY KIT NEEDED:
| |
1963-64 UPPER IDLER ARM BUSHING
See Diagram Page 150
All Except some Hi-Po
2 7/16" Long - 5/8" I.D. - 1 9/32" O.D.
C3AZ-3356A NOS $10 Each
| |
1963-64 LOWER IDLER ARM BUSHING
See Diagram Page 150
All Except some Hi-Po
1 3/4" Long - 5/8" I.D. - 1 9/32" O.D.
C3AZ-3358A NOS $10 Each
| |
1963-64 LUG NUTS (WHEEL)
1/2"-20
5 Per Wheel
C0AZ-1012A $1.50 Each
|  |
1963-64 INTAKE MANIFOLD (ALUMINUM) BOLT AND WASHER
HIGH PERFORMANCE 427-406-390
These are the correct length 3/8 bolts with washer used on all of the
High Performance aluminum intake manifolds.
20498-S Bolt and Washer Set of 10 $12.50 Set
|  |
1963-64 INSTRUMENT CLUSTER VOLTAGE REGULATOR
All
B9MZ-10804C $22
|  |
1963-64 FRONT MOTOR MOUNTS
All 427-406-390-352
See Diagram Page 153
C3AZ-6038A Right
C3AZ-6038B Left
SPECIFY RIGHT OR LEFT NORS $36.50 Each
|  |
1963-64 FRONT MOTOR MOUNTS
All 289 V8
See Diagram Page 153
C3AZ-6038G Right
C3AZ-6038H Left
SPECIFY RIGHT OR LEFT NOS $35 Each
|  |
1963-64 FRONT MOTOR MOUNTS
All 6 Cylinders
See Diagram Page 153
C3AZ-6038C Right
C3AZ-6038D Left
SPECIFY RIGHT OR LEFT NOS $18 Each
| |
1963-64 REAR ENGINE MOUNT SUPPORT
(TRANSMISSION MOUNT)
All 352-390-406-427
See Diagram Page 153
Standard or Automatic Transmission
C3AZ-6068C $35
|  |
1963-64 MUFFLER HANGER INSULATOR REPAIR STRAP
Cut and pre-drilled rubber reinforced insulator material
for repair of all muffler hangers.
C0AZ-5260A $4 Each
|  |
1963-64 OIL FILLER CAP CHROME High Performance
All 427-406-390 High Performance
C3AE-6766A $20
|  |
1963 OIL FILLER CAP
Black or Grey Non-Emission
No Color Choice
All Except Special High Performance
B6AZ-6766A NOS $14
|  |
1963-64 OIL FILLER CAP (BLACK PAINTED)
All 427-406-390 High Performance
C3AE-6766B $17
|  |
1963-64 OIL FILTER AUTOLITE FL-1
Production filter that came standard on All Ford engines
with spin-on filter, V8, 6 cylinder and High Performance.
C1AZ-6731A Reproduction $12.95
|  |
1963-64 OIL FILTERS
1963-64 Rotunda Gold 6000 Filter
C1AZ-6731AG $36.95
1964 Rotunda Red R1-A Filter
C1AZ-6731AR $36.95
|  |
1963-64 PCV CRANKCASE VENTILATION REGULATOR
VALVE ASSEMBLY
All Special High Performance
4bbl/6bbl/8bbl and All Big Block V8s with PCV System
C1TZ-6A666A Replacement $11.50
|  |
1963-64 PCV INTAKE ELBOW FITTING
High Performance
All 427 2x4
406-390- 3x2
Some 427-406-390 4bbl High Performance
This is the elbow fitting that is screwed into the back
of the intake manifold below the rear carburetor base.
The PCV valve is then screwed into this elbow fitting.
PCV Valve is not included.
376711-S $12.00
|  |
1963-64 PINION SEAL
All 427-406-390-352
C3AZ-4676A $11
|  |
1963-64 PITTMAN ARM
All with MANUAL STEERING See Diagram Page 150
C3AZ-3590B NOS VERY LIMITED SUPPLY SOLD OUT
|  |
1963-64 POWER STEERING TO MANUAL STEERING CONVERSION
Easily convert power steering to manual steering.
No other parts are needed.
PS/MS-Conv $230
|  |
1963-64 RADIATOR CAP
Standard Zinc Plate Finish
All Engines Standard Equipment Cap
R-12 SMCO
B8A-8100A $19
| |
1963-64 RADIATOR CAP CHROME
Correct Type
C2SZ-8100A NOS $17
|  |
1963 RADIATOR CORE SUPPORT SHIMS
All Models See Diagram Page 35
Fiber Shim 6 1/2" Long x 2" Wide with Slotted Center
C3AZ-8126A 5 Per Package $7.50
| |
1964 RADIATOR CORE SUPPORT TO FRAME
MOUNTING PADS
These are the mounting pads that go between the core
support and the frame. Each set contains 2 upper pads,
2 lower pads, 2 bolts, 2 flat washers, 2 lock washers and
2 nuts.
One Set will mount the core support to the frame.
C4AZ-8125A/B Set See Diagram Page 35 $35 Set
|  |
1963-64 UPPER RADIATOR HOSE (Moulded)
All 352-390-406-427
C2RZ-8260 H/J NORS $17.50
All 260-289
May have to be shortened in some cases
C4RZ-8260B $17.50
|  |
1963-64 LOWER RADIATOR HOSE (Moulded)
All 352-390-406-427
C4AZ-8286D NORS $19
All 260-289
C3AZ-8286B $19
|  |
1963-64 RADIATOR SUPPLY / OVERFLOW TANK
All 427-406-390-352
This is the radiator supply/overflow tank mounted to the
intake manifold. These tanks have been very hard to find but
are now available as a Reproduction.
C1AE-8A080B $220
|  |
1963-64 RADIATOR SUPPLY TANK OVERFLOW HOSE J-CLIP
427-406-390-352
This clip is missing on almost all of the Big Block Radiator Supply
Tank Overflow Hoses. The clip attaches to a water pump mounting
bolt and holds the radiator supply tank overflow rubber hose firmly
in place.
All 63 or 64 Ford Models with a Big Block V8 used this clip on
the supply tank overflow hose.
379042-S $1.95
|  |
1963-64 REGULATOR
15 Volt, 30 AMP, 3 Terminals
All 6 and V8s
C3TZ-10505B Motorcraft $53
Replacement $30
|  |
1963-64 RIGHT ANGLE ELECTRICAL CONNECTOR PLUG
AND LEAD
Right angle plug with 11½" Lead used to replace damaged
connectors on solenoid, distributor, coil, water temp sending
switch, stop light switch and many other areas in the engine
compartment and behind the dash.
C3AZ-13644A All $2.50
|  |
1963 ROAD DRAFT TUBE Non PCV
All High Performance 427-406-390
Without PCV System
C0AE-6758E $175
|  |
1963-64 UPPER SHAFT KITS
See Diagram Page 149
All
Includes 1 Shaft, 2 Bushings, 2 Seals, 2 Grease Fittings
C0AZ-3047A $95 Each
| |
1963-64 FRONT SUSPENSION LOWER CONTROL ARM
OFFSET SHAFT
See Diagram Page 149
This is the front offset shaft that mounts the front of the
lower control arm to the front crossmember. This item is usually
damaged because of improper installation or worn out lower control
arm bushings. This is the Offset Shaft Only
C3AZ-3057A $115 Each
|  |
1963-64 LOWER CONTROL ARM OFFSET SHAFT
RETAINER BOLT AND BUSHINGS
This is the large 1 7/8" bolt and bushing that the lower control
arm offset shaft screws into at the front crossmember.
These are totally rebuilt and done here in the U.S.A.
** Because of the limited number of these parts, we must receive a
Rebuildable core before we can ship the replacement part.
See Diagram Page 149
C3AZ-3069C $90 Each |  |
1963-64 FRONT SUSPENSION LOWER CONTROL ARM
SHAFT BUSHING KIT
See Diagram Page 149
Each Kit Includes:
1 Front Bushing 3/4" I.D. x 2 3/4" Long and
1 Rear Bushing 7/8" I.D. x 2 9/16" Long
1 Kit Does 1 Lower Control Arm
C3AZ-3069G&H $65 Per Kit
| |
1963-64 SHOCK ABSORBERS
See Diagram Page 149 & 152
OEM - STANDARD EQUIPMENT TYPE - Gas Charged
1" Piston SAS-2F Front
SAS-2R Rear $65 Pair
EXTRA HEAVY DUTY - ORIGINAL EQUIPMENT TYPE
Gas Charged
1 3/8" Piston SAHD-2F Front
Hi-Po 390-406-427 SAHD-2R Rear $95 Pair
SPECIFY YEAR - FRONT OR REAR
|  |
1963-64 SHOCK ABSORBER MOUNTING REPAIR KIT
Each Kit contains 2 Nuts, 2 Washers, 2 Insulators
1 Kit Does 1 Shock
*Included with new Shocks
C1SZ-18198C All $6.00 Each Kit
| |
1963-64 SPARE TIRE HOLD DOWN T-BOLT
All
B7A-1448A $12.50 Each
|  |
1963-64 SPARK PLUG WIRES
Correct moulded boots and numbered wires.
Includes Coil Wire
SMALL BLOCK: All 260-289 V8s
C3OZ-12259K $39.95 Set
BIG BLOCK: 352-390-406-427
Including High Performance
C3AZ-12259 INQUIRE
| |
1963-64 SPARK PLUG WIRE SEPARATORS
Locks on each valve cover and separates
each plug wire.
B8Q-12297A All NOS $4 Each
|  |
1963-64 SPARK PLUG WIRE SEPARATORS
Comb Shape - 8 Prongs
Attaches to wires only
B6A-12297A All NOS 95¢ Each
|  |
1963-64 SPEEDOMETER GEAR RETAINING CLIP
C1DD-17292A All NOS $1.95
|  |
1963-64 SPEEDOMETER CABLE CASING AND CORE:
1963: All with 3-speed, 3-Speed Overdrive,
All Automatics, All 4 Speeds
C3AZ-17260C $35
1964: All with 3-speed, 3-Speed Overdrive,
All Automatics, All 4 Speeds before 1/18/64
C3AZ-17260C $35
1964: All with 3-speed, 3-Speed Overdrive,
All Automatics, All 4 Speeds after 1/18/64
C5DZ-17260C $35
|  |
1963-64 REAR SPRING CLAMP
See Diagram Page 152
All 2 1/2" Wide Springs
Used to clamp rear leaf springs together
SPECIFY NUMBER NEEDED
C4DZ-5724A $17 Each
|  |
1963-64 REAR SPRING FRONT SHACKLE KIT
See Diagram Page 152
Includes 1 Bolt and Nut, 1 Pair Bushings
1 Kit Does the Front of 1 Spring
C3AZ-5630A NOS $39.50 Each Kit
|  |
1963-64 REAR SPRING REAR SHACKLE KIT
See Diagram Page 152
Includes 1 Shackle and Bar Assembly, 2 Nuts and 4 Bushings
1 Kit Does the Rear of 1 Spring
C2AZ-5630A All NOS $18.50 Each Kit
|  |
1963-64 FRONT STABILIZER BAR END REPAIR KIT
See Diagram Page 149
2 Required
C0AZ-5A486A $9.50 Each Kit
|  |
1963-64 STARTER SOLENOID SWITCH
All 1963 & 1964 Until 4/1/64
Brown OEM B6AZ-11450A $49.95
1964 from 4/2/64
Black OEM C4AZ-11450A $49.95
Replacement B6AZ-11450AR $17.50
|  |
1963-64 STEERING BOX
Manual and Power Steering
All Models
Professional Quality Rebuilt done here in the U.S.A.
**Because of teh limited number of these parts, we must receive a
Rebuildable core before we can ship the replacement part.
See Diagram Page 150
C3AZ-3504B $375
|  |
1963-64 STEERING BOX PITTMAN ARM SHAFT OIL SEAL
1 5/64"ID 1 9/16" OD 1/4" Thick
Oil Seal where Pittman Arm exits steering box
C3AZ-3591A $19
| |
1963-64 STEERING BOX SECTOR SHAFT BUSHING
2 Required
1 1/8"ID 1 3/8"OD 1" Long
C1AZ-3576B $15.50
| |
1963-64 STEERING INSULATOR COUPLING BOLT
Special All Models
358794 NOS $3.75
|  |
1963-64 TIE ROD (INNER)
See Diagram Page 150
Specify Manual or Power Steering
C3AZ-3280A Manual Steering
Right or Left $125
C3AZ-3280B Power Steering
Right or Left $125
| |
1963-64 TIE ROD END (OUTER)
See Diagram Page 150
Right or Left Side
Manual or Power Steering
C3AZ-3A130A NOS $45 Each
| |
1963-64 TIE ROD ADJUSTING SLEEVE
See Diagram Page 150
C2AA-3310B All $18.50 Each
|  |
1963-64 427 TIMING POINTER
Correct steel pointer used on All 427s
C2AZ-6023B $85
|  |
1963-64 TOE-IN STABILIZER BAR
See Diagram Page 151
Retains alignment during braking action.
Eliminates toe-in change.
Eliminates caster change.
Stabilizes front end permanently.
TCB $39.95
|  |
1963-64 TRANSISTORIZED IGNITION AMPLIFIER
All with Transistorized Ignition
I.D. Mark #C5SF-12A027B
C3TZ-12A027C NOS LIMITED SUPPLY $325
|  |
1963-64 TRANSMISSION COOLER LINES INLET AND
OUTLET ON 352/390 V8s with CRUISE-O-MATIC
TRANSMISSION (Pre Bent)
These are the lines that go from the radiator to the transmission.
C3AZ-7A030/31A Set of 2 $59.95 Set
Plus $25 Oversize Shipping
| |
1963-64 TRANSMISSION 4-SPEED SHIFT LEVERS
All Models Bench Seat or Bucket Seats INQUIRE
|  |
1963-64 TRANSMISSION 4-SPEED LOWER SHIFT
MECHANISM WITH RODS
T-10 and Toploader INQUIRE
|
1963-64 VALVE COVER GASKET
All 427-406-390-352
Correct Silver colored Cork Gasket
B9AZ-6584A $21 Pair
| |
1963-64 WATER PUMP
All 427-406-390-352
Correct Water Pump with dowel pin for
generator adjusting bracket
C4AZ-8501A/B LIMITED SUPPLY $125
CORE CHARGE $30
|  |
1963-64 WATER PUMP BY-PASS HOSE
All 260-289 V8s
Rubber elbow from water pump to intake
5/8" ID 3 1/4" Long
C2OZ-8597A NOS $12 Each
|  |
1963-64 WATER PUMP PULLEY
All 427-406-390 High Performance
This is the special pulley used on the
High Performance Engines
B7A-8509B NOS VERY LIMITED SUPPLY SOLD OUT
|  |
1963-64 WHEEL BEARING NUT RETAINER
All Models
374536-S NOS $1 Each
|  |
1963-64 WHEEL LUG NUTS
1/2"-20
5 Per Wheel
C0AZ-1012A $1.50 Each
|  |
1963-64 WHEEL LUG WRENCH AND JACK HANDLE
All Models
Lug nut wrench and handle for the bumper jack
C2SZ-17032A NOS $30
|  |
1964 POWER WINDOW DOOR AND QUARTER REGULATOR
DRIVE REPAIR KIT (Gear Kit)
C4AZ-62234A24A All NOS $70 Each
| |
1963-64 POWER WINDOW MOTOR DRIVE COUPLER
This part connects the power window motor shaft to the
power window regulator.
Also used on Station Wagon Tailgate window motor.
C1VB-5723440A $22
|  |
